/
/
/
Natural Color, Medium-Flow HDPE for Injection Molding
| Property | Value | Unit |
|---|---|---|
| Color | Natural | - |
| MFR (Melt Flow Rate) | 5~10 | g/10min |
| Tensile Strength | ≥18 | MPa |
| Notched IZOD Impact | ≥4 | KJ/㎡ |
| Carbon Emissions | 0.6129 | ton CO₂e |
rHDPE-W180A is well-suited for general-purpose injection molding in:
| Property | Virgin HDPE | rHDPE-W180A | Advantage |
|---|---|---|---|
| MFR | 4~8 | 5~10 | Better Flowability |
| Impact Strength | 3~4 KJ/㎡ | ≥4 KJ/㎡ | Improved Toughness |
| Carbon Emissions | 2.3 ton CO₂e | 0.6129 ton CO₂e | ~73% Reduction |
| Parameter | Recommended Range |
|---|---|
| Injection Temp. | 180-230°C |
| Mold Temp. | 40-60°C |
| Back Pressure | 5-10 bar |
| Drying | Not Required |
rHDPE-W180A reduces plastic waste and supports carbon neutrality goals through efficient reuse of post-consumer resources.
Request a sample or quote for rHDPE-W180A to upgrade your product with lower carbon and reliable performance.
